Why does water bubble up in my toilet when other fixtures are used?
If the leak only occurs when using the shower, check for loose tile or missing grout first. Water may be seeping through unexpected areas. Before doing any major tile repairs, a series of tests should be performed in a specific order to find any plumbing-related problems or eliminate plumbing as the problem.Home Alliance knows these tests and how to perform them in the most efficient manner. Don’t live with a drip. Call Home Alliance at (877) 777-0796 today.
Similar Questions
Why is a breaker in my panel hot to touch?
This overheating is a serious defect and could cause arcing in the breaker. It should be immediately replaced.
How Can I Prevent Frozen Pipes?
You most likely have a frozen pipe if you turn on your faucet, and barely a trickle comes out. To solve this issue, we recommend trying these suggestions: Maintaining the faucet open. Water will start to flow through the frozen section as the frozen area starts to thaw as you treat the frozen pipe. Ice in the pipe will begin to melt if water is run through it. Using an electric heating pad wrapped around the pipe, an electric hair dryer, a portable space heater (kept away from combustible things), or wrapping the pipes in towels soaked in hot water are all methods of applying heat to the piece of pipe. Use of a blowtorch, kerosene or propane heater, a charcoal stove, or any other appliance with an open flame is prohibited. Heating the area until the water pressure is back to normal. Call a qualified plumber if you cannot find the frozen location, if it is inaccessible, or if you cannot defrost the pipe. Examine every other faucet in your house to see if there are more frozen pipes. Other pipes could also freeze if one pipe does.
How do I completely turn off my Nest Thermostat?
In the bottom-left corner, select HEAT. Depending on where you are located, it might say cool instead. Once the pop-up menu appears, select "Off." The thermostat will turn off until you turn it back on again.
What does a flashing snowflake on my thermostat mean?
The "cool on" or the snowflake icon flashing indicates that the thermostat is in delay mode to protect your equipment from short cycling. This process can take up to 5 minutes.
I called yesterday to schedule an HVAC repair service and wanted to see if I could schedule a later time than the morning time I got scheduled.
Yeah, we can get you a schedule today between 1 and 4 PM. I'll reschedule that for you.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible