Can I dim an LED light bulb with a standard dimmer?
Each LED bulb has its own characteristics. You should read the information on the package. There are many websites where dimmer manufacturers like Lutron Electronics lists all the light bulbs they have tested and what dimmers they will work with. Also, many light bulb manufacturers list the type of dimmers that will work with their bulbs or strips. If the LED light bulb strobes as it dims downward that is a good indicator that the bulb and the dimmer are not compatible.
Similar Questions
What is the average size of a chair?
The seat height should be 16-17 inches, the seat width should be 15-18 inches, and the seat depth should be between 16-17 inches. If armrests are used, they should fit under the table apron and be 7-9 feet above the seat.
How long is a framing 2x4?
There are two common dimensions for wall studs: two-by-six and two-by-four. In homes with 8-foot walls, the studs are usually 92 inches long. For homes with 9-foot walls, the studs are typically 104 1/2 inches long. Pre-cut studs are generally used in homes with 10-foot walls.
. Do you repair appliances like Dacor ovens? It doesn't seem like it's heating right. The temperature doesn't seem correct, and the door doesn't shut completely.
We can definitely help you with that problem. We have a service call fee, which pays for the technician to travel to your home, inspect your unit and tell you what's wrong. That will be waived if you proceed with the repairs.
We had a dryer that went out today, and we need to get it repaired if we can today. It is a Kenmore Elite dryer 2 and a half years old. I would like a service as soon as possible.
There is a service fee for our technicians to come out, but that will be waived if you proceed with the repairs. Be sure to make your lines open as our technician will call you 30 minutes before arriving at your home.
How Do I Unclog a Drain Pipe That Is Outside My House?
If the blockage is not too significant, force it out using a blow bag. This drain can be cleaned with a standard main snake, a water jet, or a blow bag. I prefer a standard main machine since it cleanses the pipe's interior, chops up any roots, and forces debris out. A jet will remove any sand and debris from the line by flushing the pipe with 2,500 pounds of water pressure and eliminating sludge and debris from the inner pipe walls. A blow bag is a tool that expands within a pipe until it locks in place and then forces water through the pipe. This device breaks through the clog but doesn't remove all the debris or scrape the pipe clean.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible