How do I reset my electronic throttle control manually?
Manually resetting your electronic throttle control can be challenging. To start, confirm that the accelerator pedal is fully released. Then, please turn on the ignition and let it run for ten seconds before turning it off again. Make sure to listen for any movement from the throttle valve during those ten seconds.
How long do Frigidaire Ultra water filtration system filters last?
The lifespan of Frigidaire Ultra water filtration system filters can vary depending on factors such as the specific model, water quality, and usage. On average, the filters for Frigidaire Ultra water filtration systems are designed to last approximately 6 months. To ensure optimal performance and water quality, it is recommended to replace the filters at least every 6 months or as indicated by the manufacturer's recommendations. Some models may have a filter replacement indicator that alerts you when it's time to replace the filter.
Why is my refrigerator running longer and the temperatures warming up?
The refrigerator/condenser freezer's coils must be cleaned every six months or as needed. Not only will the temperatures rise if the condenser coils are not cleaned as the manufacturer advises, but the compressor's life will also be shortened, necessitating an expensive repair.
How many watts can a 15-amp breaker hold?
A 15-amp breaker can hold a maximum load of 15 amps or 1,800 watts (15 amps x 120 volts = 1,800 watts) for a sustained period of time without tripping. However, It's important to note that electrical circuits should never be loaded to their maximum capacity for an extended time as it can cause overheating and potentially start a fire. It's always a good idea to consult a licensed electrician if you have questions or concerns about your electrical system.
I have an appointment scheduled for tomorrow, and my appliance seems to be working, so I wanted to cancel it.
You want to cancel the appointment for your Thermador oven. Let me go ahead and cancel that for you.
What would cause my furnace to blow cool air when it is running in the heating mode?
There are actually a number of reasons this could happen, the most common is caused by a safety limit that has failed due to a plugged filter or by having too many air vent registers blocked or closed off. If you are still having trouble, feel free to schedule a service call with us (877) 777-0796 and we’ll be happy to fix it for you.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible