Ask us anything
How do you reset a Frigidaire front loader dryer?
To reset a Frigidaire front loader dryer, you can try the following steps:
1. Ensure that the dryer is powered on and idle.
2. Press and hold the "Cancel" button and the "Start" button simultaneously for approximately 3 seconds.
3. Release the buttons once the display shows a series of lights or an error code.
4. Wait for a few seconds while the dryer resets to its default settings. The display may go blank during this process.
5. After the reset is complete, the dryer should be ready for use. You can select your desired drying cycle and start a new drying cycle.
If you continue to experience issues or error codes after the reset, consult the dryer's user manual or contact Frigidaire customer support for further assistance.
1. Ensure that the dryer is powered on and idle.
2. Press and hold the "Cancel" button and the "Start" button simultaneously for approximately 3 seconds.
3. Release the buttons once the display shows a series of lights or an error code.
4. Wait for a few seconds while the dryer resets to its default settings. The display may go blank during this process.
5. After the reset is complete, the dryer should be ready for use. You can select your desired drying cycle and start a new drying cycle.
If you continue to experience issues or error codes after the reset, consult the dryer's user manual or contact Frigidaire customer support for further assistance.
Similar Questions
- Is it worth considering a zoning system with my Trane HVAC setup for more precise temperature control in different areas of my home?
- Does the Rheem R801T UH Endeavor Line Classic Series Gas Furnace provide reliable two-stage heating?
- How do i reset my dometic single zone thermostat?
- How to clear clogged food in the dishwasher?
- Should I be concerned about the noise levels of my Bryant Preferred series dehumidifier, and are there quieter alternatives available?
- Are store bought drain cleaners harmful to my pipes?
- How do I adjust the volume on my ADT alarm system?
- We installed a water heater that needs 240V, but the panel is located at the back of the building, so it needs to be wired for a long distance. It's about 100 ft.
- How to light a hot water heater Whirlpool model FGHR4040T3NOV?
- How do you replace the lower heating element for 50-gallon Whirlpool water heater?
Similar Blog
August 28
10383
Home appliances
Bosch Dishwasher Noise: Common Sounds and Solutions
Dishwashers are an essential modern convenience, designed to save time and effort while ensuring our dishes are spotlessly clean. Bosch dishwashers, renowned fo...
March 08
6399
Home
What You Can Fix Yourself And When To Call A Professional
Have you ever found yourself in the midst of a plumbing crisis, with water leaking from a burst pipe or a clogged drain causing havoc in your home? Plumbing iss...
October 12
8738
Home
Reducing Food Waste at Home
Our collective efforts can help minimize food waste by 50% by 2030. Start using these tips immediately to reduce food waste, save money, and protect the environ...
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible