How long does it take to wash a load of laundry?
Though it may not seem like it, laundry doesn't take that long. A wash cycle is about 30 minutes per load, and a dry cycle lasts around an hour.
Similar Questions
I have an LG washer that is leaking. It's a stacked unit and in a closet. Can you guys get it out first? How much would it cost? Are you available for tomorrow?
Unfortunately, we are understaffed and can't send additional people to help. We have a diagnostic fee, which pays for the technician to travel to your home, inspect your unit and tell you what's wrong. That will be waived if you proceed with the repairs with us. We have an available spot for tomorrow. If you'd like, I can book you for tomorrow early morning. Please keep your phone lines active since our technicians will call you 30 minutes before their arrival.
I have an appointment at 2 o'clock for my refrigerator. The gentleman called he'd be there in 15 minutes, and it's been half an hour. Is there any way to contact him, please?
Upon checking here, it is today between 12pm and 3pm. Maybe the technician is on his way; maybe he had a little traffic, but then again, he will give you a callback. If ever the technician didn't show up, just give us a call again.
How many kW is 1 ton AC?
The typical power consumption for a 1-ton AC unit is about 3.517 kW.
How to change a light bulb?
Turn off the power. Make sure the power is off first. The fuse box's big red power button should be turned to "off" for the safest method of doing this. Let it cool. Before touching the bulb, give it time to cool. Use a ladder. Use a stepladder to make sure you can reach the bulb safely. Remove bulb. Remove the lightbulb from the socket. Replace the bulb. Lightly but firmly press a new bulb into the socket. Depending on the kind, slowly twist it clockwise until it locks into place or until it won't spin any further. Restore power. Restart the power once the bulb has been installed, then turn on the light. Dispose of the old bulb. The old bulb's broken, highly sharp glass needs to be disposed of securely. To safely dispose of the old bulb, wrap it in the packing from the new one.
How to fix a Frigidaire refrigerator that displays an H?
When a Frigidaire refrigerator displays an "H," it usually indicates a fault with the refrigerator's temperature sensor. To fix this issue, you can try the following steps: Unplug the refrigerator from the power source and wait a few minutes to allow it to reset. Check the temperature settings on the control panel and ensure they are set to the desired level. Adjust if necessary. Inspect the temperature sensor, typically located near the evaporator coil in the freezer compartment. Look for any visible damage or loose connections. If found, the sensor may need to be replaced. Reconnect the temperature sensor securely if it appears to be in good condition. Plug the refrigerator back in and monitor it to see if the "H" error code clears. If the code persists, it is recommended to contact Frigidaire customer support or schedule a service appointment with a qualified technician for further diagnosis and repair.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible