Ask us anything
How to reset a Frigidaire washer dryer combo?
Resetting a Frigidaire washer dryer combo can help resolve certain issues and restore the appliance to its default settings. To reset the washer dryer combo, follow these steps:
1. Ensure that the appliance is powered on and idle.
2. Press and hold the "Cancel" button and the "Start" button simultaneously for approximately 3 seconds.
3. Release the buttons once the display shows a series of lights or an error code.
4. Wait for a few seconds while the appliance resets to its factory settings. The display may go blank during this process.
5. After the reset is complete, the washer dryer combo should be ready for use. You can set your desired wash and dry cycles and start a new load.
1. Ensure that the appliance is powered on and idle.
2. Press and hold the "Cancel" button and the "Start" button simultaneously for approximately 3 seconds.
3. Release the buttons once the display shows a series of lights or an error code.
4. Wait for a few seconds while the appliance resets to its factory settings. The display may go blank during this process.
5. After the reset is complete, the washer dryer combo should be ready for use. You can set your desired wash and dry cycles and start a new load.
Similar Questions
- Should I consider the RUCS Model Series, like the RUCS75iN, for a smaller property with limited space for a water heater?
- How to clean and maintain the outdoor condenser unit for the York YC2F 15.2 SEER2 Air Conditioner?
- Does a KitchenAid 550 have brushes?
- How to replace the heater coil in a Sears Kenmore model 417.9480 2301?
- How do I program the thermostat settings on a Carrier Infinity® SYSTXCCITN01 thermostat to optimize climate control in my commercial space?
- How do I program my Goodman smart thermostat for optimal comfort and savings?
- How do I check for gas leaks in my Takagi T-H3J-OS-N device?
- Is it okay to service the Gold S9V2-VS Gas Furnace on your own to improve efficiency?
- Does regular filter replacement impact the lifespan of my Goodman packaged unit?
- Is it ok to delay the replacement of my Trane XT80 gas furnace's ignitor, and what are the potential consequences?
Similar Blog
April 22
9993
Electrical
The Danger of DIY Electrical Repairs
Are you a DIY enthusiast with a knack for fixing things around the house? It's exhilarating to take on new projects and save some money along the way. However, ...
March 25
6591
Electrical
Troubleshooting: How To Fix A Light?
Lighting is an integral part of everyday existence, whether it's to create ambiance or provide illumination. Unfortunately, lights can malfunction at any ...
March 14
5809
Plumbing
Common Sewer Line Problems
Sewer lines are an important part of any home's plumbing system, responsible for carrying waste and wastewater away from the property. However, just like any ot...
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible