I am just calling for service on unclogging a toilet
We can get you a plumber tomorrow in the morning. For our plumber to come out, we have a diagnostic fee . But you don't worry about it, as it gets waived off once you proceed with the job. And you're only paying just the total cost of the job done. So that diagnostic fee will go towards the job after. Our plumber will give you a call 30 minutes before they go to your place.
How to replace an electrical socket?
Replacing an electrical socket is an easy do-it-yourself project that just about anyone can accomplish. It's essential to take proper safety precautions when working with electricity, so make sure you shut off the breaker supplying power to the socket before doing any work. Begin by loosening the screws on the cover plate above the socket. You will use these screws to attach the new socket, so remove them and set them aside. Next, unscrew the wires from the terminals on the bottom of the socket by loosening their terminal screws and compressing the spring. You may have three or four wires from the previous socket; make sure to label them as you take them off so that you can properly reconnect them on the new socket. Once your old socket has been removed, you can affix your new one by matching up the terminal screws with their corresponding colored wires and tightening them. Screw the cover plate and turn on the power to test it out! Make sure your work is secure and safe, and enjoy your updated electrical socket!
How fast do the blades on wind turbines spin?
The blades rotate at 10-20 rpm based on wind conditions, with the tips traveling up to 120 mph because of the length of the blades. The blade tips spin at 180 mph during maximum wind speeds.
How much does it cost to put in a well and septic system in texas?
A septic system installation typically costs between $2,800 and $8,000. The average cost ranges from $5,000 to $22,500 for well and septic system drilling and installation.
I had someone here earlier today, and they had given me a quote for doing the repair. And I just want to try and go ahead and get that scheduled. Will, you guys just give me a call when the parts will come in or do I need to reach out to the technician?
Okay, I will go ahead and reach out to the technician to let him know that you want to proceed with the repair. Keep your lines open or active because I will let the technician call you for any updates and also provide you with an estimated time of the part to be ordered. Our technician will provide you an estimated time if when the parts will arrive.
Can a frost-proof outside faucet freeze?
Yes, unfortunately we get calls every spring to replace outside faucets that have sprung a leak in a customer’s basement. In most cases, they are frost-proof outside faucets that have frozen for one of a few reasons. One, a hose was left on the faucet in the winter, not allowing it to completely drain when shut off. Two, and the most common cause, installation error. Frost-proof faucets must be installed properly to eliminate the possibility of freezing. We warranty all installations, so making sure they are installed properly is a must.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible