Ask us anything

My Frigidaire burner on my glass top stove went out, how do I replace it? What is the cost?

Replacing a burner on a Frigidaire glass top stove is a relatively straightforward process that can be done with some basic tools and careful handling. Burners can go out or become damaged over time, so knowing how to replace them can save you the cost of a service call and repair technician fees. Here's a step-by-step guide on how to replace a burner on your Frigidaire glass top stove, along with information on the potential cost:

Materials and Tools You'll Need:
Replacement Burner: Ensure you have the correct replacement burner for your specific Frigidaire stove model. You can find this information in your stove's user manual or by checking the existing burner.
Screwdriver: A Phillips-head screwdriver may be needed to remove any screws securing the burner.

Step-by-Step Guide:
1. Safety Precautions:
* Before starting any work on your stove, ensure that it is disconnected from the electrical supply. Unplug it from the wall or turn off the circuit breaker that controls the stove.
2. Access the Burner:
* Lift the glass cooktop or open the stove's access panel, depending on your specific model. Most modern glass top stoves have a hinged access panel that can be lifted to provide access to the burners.
3. Remove the Damaged Burner:
* To remove the damaged burner, first disconnect the wires that are connected to it. These wires may be connected via terminal connectors or plug-and-socket connections. Carefully disconnect them by pulling them off the terminals.
* If your burner is secured with screws, use a screwdriver to remove any screws holding it in place.
* Lift the damaged burner out of its housing. Be gentle to avoid damaging the glass cooktop.
4. Install the New Burner:
* Position the new burner into the same location where you removed the old one.
* If screws were used to secure the old burner, reattach them to secure the new one in place. Tighten the screws but do not over-tighten, as this can damage the glass surface.
* Reconnect the wires to the new burner. Match the wires to their respective terminals based on color coding or markings. Push the connectors firmly onto the terminals to ensure a secure connection.
5. Test the Burner:
* Before reassembling the stove, plug it back in or turn on the circuit breaker to restore power to the stove. Test the newly installed burner to ensure it heats up properly.
6. Reassemble the Stove:
* If you had to lift the glass cooktop or access panel, carefully lower it back into place and secure it as per your stove's design. Make sure it's properly aligned and seated.
* Tighten any screws or fasteners that hold the glass cooktop or access panel in place.
7. Power Back On:
* Once you've reassembled the stove, plug it back in or turn on the circuit breaker to restore power.
8. Final Test:
* Test all the burners on your stove to ensure they are functioning correctly. Check for even heating and any signs of issues.

Cost Considerations:
The cost of a replacement burner for your Frigidaire glass top stove can vary depending on the specific model and the type of burner needed. In general, replacement burners for electric stoves are relatively affordable, typically ranging from $20 to $50 per burner. However, the cost may be higher if you require a specialized or larger burner.

If you're unsure about the cost and compatibility of a replacement burner for your stove, it's advisable to consult the user manual or contact Frigidaire customer support for guidance. Additionally, you can inquire at appliance parts stores or online retailers for the exact replacement burner you need.

While replacing a burner is a DIY-friendly task, if you are uncomfortable with the process or encounter any difficulties during installation, consider seeking assistance from a qualified appliance technician to ensure the job is done correctly and safely.

In conclusion, replacing a burner on a Frigidaire glass top stove is a manageable DIY task that can save you money on repair technician fees. Ensure you have the correct replacement burner, follow the steps carefully, and prioritize safety by disconnecting power before beginning any work on the stove. The cost of the replacement burner can vary depending on the model and type, but it is generally affordable, making it a cost-effective solution for restoring the functionality of your stove.
Connect to virtual expert

Our virtual experts can diagnose your issue and resolve simple problems.