Vladimir is over at our house right now, doing a vent cleaning for the dryer. And I wanted to schedule also for next week to come out to my office to do a vent cleaning there as well, please.
Okay, in this case, we are all set on Wednesday between 1pm and 3pm, and the service expert will call you 30 minutes before.
Similar Questions
HOW LONG DOES HVAC EQUIPMENT LAST?
With proper maintenance, it can last 10 to 15 years and possibly longer.
Which way do you turn a screw?
If you're using right-handed screws, rotate them clockwise to remove them. However, if left-hand thread screws are used, you'll have to rotate them counterclockwise.
How to Defrost a Viking Refrigerator?
Power down the refrigerator by disconnecting it from the socket before attempting to defrost the freezer of a Viking appliance. In such a case, flip the circuit breaker off. Remove all the food from the freezer to empty it. To absorb water, place clean rags or towels around the perimeter of the floor of the freezer. Depending on the buildup, you should disconnect it for 24 hours to allow it to thaw. After defrosting, clean the freezer and let it air dry thoroughly. Plugging the refrigerator back in will turn it on. Give the device 24 and 48 hours to cool completely and freeze once again.
We're supposed to have an appointment today from 10 to 12, and no one came up.
As per checking, your schedule is for 10 and 2. Unfortunately, the technician isn't answering the calls. Most likely, he got stuck with the previous job. But once we have an update, we will give you a call. Our technician will also call you 30 minutes prior to his arrival.
What is the red wire on a light switch?
The red wire on a light switch is typically a traveler wire used in a three-way switch configuration. In a three-way switch setup, two switches control the same light fixture, and the red wire connects the switches. The red wire is usually connected to the traveler terminal on the switch, typically a screw that is a different color than the other terminals. The other two wires on the switch are typically the hot (black) wire and the neutral (white) wire. It's essential to remember that a light switch's wiring layout may vary depending on your home's age and local electrical codes. If you are uncertain about the wiring in your light switch, it is always smart to seek advice from an authorized electrician so that the connections abide by safety protocols and meet all code requirements.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible