What should I do if my electricity keeps tripping?
This could be due to a number of reasons and is often a sign that your circuit is being overloaded. This may be a result of a faulty appliance, so take note as to whether your electricity trips when you plug in or use a particular device. If this is not the cause, there may be a fault somewhere in your property’s wiring that will need to be addressed by a licensed electrician.
I just wanted to confirm my schedule for today. If there's a possibility I could get a service earlier, that would great,
Yeah. Nothing changed. You still have a schedule from 3 to 6 PM.
Why are my pipes always rattling and making noise?
If you’re dealing with rattling and noisy pipes, your water lines may not be adequately secured. When your pipes aren’t secured correctly, there are likely some spots where they will rub up against your property’s floor joists, causing noticeable noises. Our team can check your pipes to ensure they are correctly secured and install pipe hangers between your joists and pipes to eliminate the rubbing noises.
Why do my drains smell?
If you notice an odor emanating from your drains, sulfur is probably to blame. To be more precise, microorganisms in the pipes are what produce hydrogen sulfide gas. While it's important to point out that this isn't the sole cause of odorous drains, it is highly prevalent. It would be best if you cleaned the pipes to solve the issue. You may pour half a cup of bleach or, alternately, half a cup of baking soda and half a cup of vinegar down the drain. Remember that using the latter of the two will result in a little chemical reaction that will allow the foam to rise back up the pipe; it is thus advisable to block the drain after pouring the vinegar to press the foam through the pipe. After using either technique, pour warm to hot water down the drain. You should contact your neighborhood plumber if this does not work.
Why do we use LEDs?
We use LEDs (light-emitting diodes) for several reasons. First, LEDs are highly energy-efficient, using up to 80% less energy than traditional incandescent bulbs, which can lead to significant cost savings on electricity bills. Second, LEDs have a longer lifespan than other types of bulbs, reducing the need for frequent replacements. Finally, LEDs are available in various colors, can be dimmed, and emit little to no heat, making them versatile and ideal for various lighting needs in homes, businesses, and public spaces.
What is the difference between 110 and 220 volts?
More voltage at the same cycles per second (cps), which means more power to the appliance. Generally, 220V is used for large appliances, 110V is used for small appliances. Using a 110V appliance in a 220V outlet will burn out the appliance. Using a 220V appliance in a 110V outlet will make the appliance run slow or not at all.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible