How deep are gas lines buried in Texas?
The depth of an electric or natural gas line may differ from when it was initially installed, with main lines typically being found at 24 inches while service lines are generally 18 inches deep.
Similar Questions
What size hole saw do I need for a deadbolt?
The deadbolt lock set has a built-in guide to ensure accuracy when taking measurements. Most standard deadbolts require only a 2-inch hole saw for the locks and a 1-inch spade bit for the sliding bolt mechanism, but be careful to use bits of the corresponding sizes.
Why is my home's plumbing making groaning and honking noises?
You may want to check to see if a toilet is leaking. Check the water level in the tank to see if water is overflowing into the overflow pipe. This is the pipe in the middle of the tank that has a small tube connected to it. If water is running into the overflow pipe, adjust the fill valve to stop the flow approximately 1 inch below the top of the overflow tube or to the water level mark stamped on the side of the tank. Periodic maintenance by a plumbing professional will ensure proper operation.It could be that you have lost your “air cushion.” To get it back, turn the water supply off at the main valve. Turn on all the faucets around your home. Then, turn on the main valve again and shut off each faucet. This should take care of the problem.
What are the advantages of a programmable thermostat?
Since they are electronic, programmable thermostats are more accurate and efficient than thermostats that contain mercury. With programmable thermostats you can control the temperature in your home at different times of day without ever touching your thermostat. Because everything is automatic, you will never forget to change the setting on your own.
I'm looking for a Maytag dishwasher repair. The dishwasher starts to fill up the water and stops. We tried to restart, but it does the same and turns off. When we start it, it still drains but discharges all of it. I would like to know how much you charge for it.
We have a service fee, which pays for the technician to come out and do diagnostics on your unit, giving you an estimate for the repairs. The service fee is waived once you go forward with the repairs with us. Our technicians will have to be physically the to inspect your unit and estimate the overall cost.
What is the standard height for a washing machine drain?
The washer drain hose should have an outside diameter of at least 30" to ensure that no water is sucked from it. The drain must also be placed between 8 feet and 30" from the floor for proper functionality.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible