How do I fix the F10 on my Frigidaire oven?

The F10 error code on a Frigidaire oven is an indication of a temperature control problem. It typically means that the oven is detecting an overheating condition. This error can disrupt your cooking and needs to be addressed promptly. Here's a step-by-step guide on how to troubleshoot and potentially fix the F10 error on your Frigidaire oven:

Safety Precautions:
* Before attempting any troubleshooting or repairs, ensure your safety by following these precautions:
* Disconnect the oven from the power source by unplugging it or switching off the circuit breaker.
* Use safety gloves and safety goggles to protect your hands and eyes.


Troubleshooting Steps for F10 Error on Frigidaire Oven:
1. Wait for the Oven to Cool Down:
The F10 error can occur if the oven is too hot. Allow the oven to cool down completely before attempting any troubleshooting.
2. Check for a Stuck Button:
Sometimes, a stuck or malfunctioning oven control button can trigger the F10 error. Press all oven buttons to ensure none of them are stuck. If you find a button that's not functioning correctly, try to unstick it. If the issue persists, you may need to replace the control panel.
3. Inspect the Temperature Sensor:
The temperature sensor (also known as the oven probe) monitors the oven's temperature. If it's faulty, it can cause the F10 error. The sensor is typically located at the back of the oven cavity. Disconnect the sensor from the wiring harness and use a multimeter to check its resistance. At room temperature, the sensor should read approximately 1,100-1,200 ohms. If the reading is significantly different, replace the temperature sensor.
4. Inspect the Oven Control Board:
The oven control board is responsible for regulating the temperature and other functions. Check for any visible signs of damage or burnt components on the control board. If you find any, the control board may need to be replaced.
5. Check Wiring and Connections:
Inspect the wiring and connections between the temperature sensor, oven control board, and other components. Loose or damaged wires can trigger the F10 error. Ensure all connections are secure and undamaged.
6. Reset the Oven:
After checking all components, reconnect the power source and turn the oven on. If the error code persists, you may need to perform a reset. To reset the oven, unplug it or turn off the circuit breaker for a few minutes and then restore power. Test the oven to see if the error has cleared.
7. Call for Professional Service:
If you've completed all the above steps and the F10 error code still appears, it's advisable to contact a professional appliance technician. The technician will have the expertise and diagnostic tools to identify and resolve more complex issues with the oven's control system and heating elements.
8. Additional Tips:
While troubleshooting and making repairs, refer to the user manual or technical documentation for your specific Frigidaire oven model. These documents can provide model-specific information and diagrams that may be helpful.
If you need to replace any components such as the temperature sensor, oven control board, or control panel, make sure to purchase the correct replacement parts that are compatible with your oven model.
Keep safety in mind throughout the troubleshooting and repair process. If you are unsure about any step or component, seek professional assistance to avoid accidents or further damage to the appliance.


In conclusion, the F10 error on your Frigidaire oven is related to temperature control issues and can have various causes, including faulty sensors, control boards, or wiring.
By following the troubleshooting steps outlined above, you can identify and potentially resolve the issue. However, if the error persists or if you're uncomfortable with the troubleshooting process, it's best to contact a qualified appliance technician for professional diagnosis and repair.

Need help with your oven? Book oven repair with Home Alliance's appliance technicians.