How to clear clogged food in the dishwasher?
Remove the lower rack, take off the filter cover, and clean the filter screen using a water-resistant vacuum, such as a shop vacuum. Additionally, it is essential to inspect the float switch to make sure it is not clogged. After all, no water if the button is stuck. If you move it around, you should be good to go.
Similar Questions
. Do you repair appliances like Dacor ovens? It doesn't seem like it's heating right. The temperature doesn't seem correct, and the door doesn't shut completely.
We can definitely help you with that problem. We have a service call fee, which pays for the technician to travel to your home, inspect your unit and tell you what's wrong. That will be waived if you proceed with the repairs.
We had a dryer that went out today, and we need to get it repaired if we can today. It is a Kenmore Elite dryer 2 and a half years old. I would like a service as soon as possible.
There is a service fee for our technicians to come out, but that will be waived if you proceed with the repairs. Be sure to make your lines open as our technician will call you 30 minutes before arriving at your home.
How Do I Unclog a Drain Pipe That Is Outside My House?
If the blockage is not too significant, force it out using a blow bag. This drain can be cleaned with a standard main snake, a water jet, or a blow bag. I prefer a standard main machine since it cleanses the pipe's interior, chops up any roots, and forces debris out. A jet will remove any sand and debris from the line by flushing the pipe with 2,500 pounds of water pressure and eliminating sludge and debris from the inner pipe walls. A blow bag is a tool that expands within a pipe until it locks in place and then forces water through the pipe. This device breaks through the clog but doesn't remove all the debris or scrape the pipe clean.
Is there an application fee and how is it determined?
Yes. The fee varies by interconnection level. A table of fees can be found here. Please note that if you ever decide to increase the size of your renewable resource system, you must file a new application and pay another application fee.
How Do I Maintain My Water Softener?
Water softeners are installed where the water line enters the home. A professional installer should carry out the installation. How do I Maintain My Water Softener? While most softeners need little care and will last for many years – problems may occasionally occur. To ensure smooth functioning, the water softener should regenerate at least once a week to assure its longevity. If your water softener is not working properly, there are several things to watch for: Check for salt build-up in the brine tank. If a crust has formed, remove it using a vacuum, clean with soap and water, and rinse well. If your water contains iron, check for iron deposits in the resin bed. If it is present, use an iron-removing product to clean the softener. Check the resin tank injector. If it is plugged with “dirty” salt, shut off the softener’s bypass plug, run a manual regeneration and then clean the injector and injector screen. Consider machines that have controls that minimize water use during regeneration. Often, one cycling a week will be sufficient for a family of four if the unit is sized properly.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible