Ask us anything
How to replace KitchenAid 9756595ES control panel?
Replacing the control panel (part number 9756595ES) on a KitchenAid appliance involves a straightforward process. Here's a step-by-step guide to help you replace the control panel: 1. Safety Precautions: Before starting any repairs, ensure the power to the appliance is turned off or unplugged to avoid electrical accidents. 2. Access the Control Panel: Depending on the specific KitchenAid appliance you have, the control panel's location may vary. For most appliances, you may need to remove screws or panels to access the control panel. 3. Remove the Old Control Panel: Once you have access to the control panel, carefully remove any screws or fasteners securing the old control panel in place. Use a screwdriver or appropriate tools for this step. 4. Disconnect Wires and Ribbon Cables: Identify and take note of the connections and positions of wires and ribbon cables attached to the control panel. Carefully disconnect these wires and cables. It's helpful to take photos or label the connections to aid in reassembly. 5. Install the New Control Panel: Take the new control panel (part number 9756595ES) and align it with the appropriate openings or slots in the appliance's housing. Make sure it fits snugly and properly. 6. Reconnect Wires and Cables: Reattach the wires and ribbon cables to the corresponding connectors on the new control panel, following the notes or photos you took earlier for proper alignment. 7. Secure the Control Panel: Once the connections are in place, secure the new control panel with screws or fasteners to hold it firmly in position. 8. Test the Appliance: Before fully reassembling the appliance, plug it back into the power source, and turn it on to ensure the new control panel is functioning correctly. Test all the functions and settings to verify that everything is working as expected. 9. Final Check: If the appliance is working correctly, reassemble any panels or covers you removed earlier to access the control panel. If you encounter any difficulties or uncertainties during the process, consult the KitchenAid appliance manual or seek professional assistance to ensure a successful replacement.
Similar Questions
- What should be the recommended procedure for replacing the UV bulbs in a Trane CleanEffects™ whole-house air cleaner?
- What is the cost of an air purification system?
- How to fix a KitchenAid mixer not turning on?
- maytag 5000 series how to fix heat sensor
- Why shouldn’t I set my thermostat below 72 degrees while using AC?
- Do I have to be present when Home Alliance is at my home?
- Is it okay to install the Silver 16 Low Profile Air Conditioner in a tight space with limited clearance?
- Kenmore 10651793410 filter replacement.
- How do I properly vent a Takagi TCT-199I-P tankless water heater?
- Should I clean and inspect the coils on the York YH2E 14.3 SEER2 Single-Stage Heat Pump as part of routine maintenance?
Similar Blog
December 23
858
Heating and Cooling
Why Is Your AC Running but Not Cooling?
Is your home feeling warm despite the AC running? You might be asking yourself, "Why is my AC running but not cooling?" This common issue can leave you frustrat...
April 04
9125
Plumbing
DIY replacing your faucet
Removing the old kitchen faucet is the most difficult element of the replacement process. Corroded pipes, difficult-to-reach nuts, and restricted access to fitt...
April 28
8735
Home
Meal Prepping For Busy Schedules
With the fast-paced nature of modern life, many people find themselves struggling to make time for healthy eating. Meal prepping is an excellent solution for bu...
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible