Ask us anything

How to replace Whirlpool freezer light?

Replacing the freezer light in your Whirlpool freezer is a simple DIY task that can improve visibility and make it easier to find items stored in the freezer. Here's a step-by-step guide on how to replace the freezer light:

Safety Precautions:
Before you begin, prioritize safety by unplugging the freezer from its power source or turning off the circuit breaker to ensure there is no electrical supply to the appliance. This will prevent any accidental electrical shock while working on the light replacement.

Tools and Materials:
Gather the following tools and materials:
Replacement freezer light bulb (Make sure it's compatible with your specific Whirlpool freezer model. Refer to your freezer's user manual for specifications.)
Screwdriver (if necessary)

Step-by-Step Guide:
Locate the Freezer Light Compartment:
Open the freezer door and inspect the interior to locate the freezer light compartment. The light bulb is typically housed in a protective cover or housing. It's usually located near the top of the freezer compartment.
Inspect the Old Bulb:
Before removing the old light bulb, check if it's hot to the touch. If the freezer has been running recently, the bulb may be hot. In such cases, it's advisable to allow it to cool down before proceeding.
Remove the Old Bulb:
To remove the old light bulb, gently unscrew it in a counterclockwise direction (lefty loosey). Be cautious not to apply excessive force, as this can break the bulb or damage the socket. If the bulb is stuck, you can use a pair of rubber or latex gloves for a better grip.
Dispose of the Old Bulb:
Properly dispose of the old light bulb following local regulations. Some areas have specific recycling programs for light bulbs. Be sure to follow any disposal guidelines applicable in your area.
Prepare the New Bulb:
Unpack the new freezer light bulb and check it for any packaging or protective seals. Remove any packaging materials, labels, or stickers from the bulb.
Install the New Bulb:
Carefully screw the new light bulb into the socket in a clockwise direction (righty tighty). Ensure that it's securely seated but avoid overtightening, as this can damage the bulb or socket. Use a gentle hand to tighten it.
Plug In the Freezer or Restore Power:
If you unplugged the freezer or turned off the circuit breaker, plug it back in or turn the power back on to restore electricity to the appliance.
Test the Light Bulb:
Open the freezer door and test the new light bulb by pressing the freezer door switch (the button that gets depressed when the door is closed). The interior light should illuminate, providing illumination inside the freezer compartment.
Final Check:
Conduct a final visual inspection to ensure that the new light bulb is working correctly and that there are no issues with its installation.
Additional Tips:
Keep track of the replacement date of the light bulb. Write down the date on a calendar or set a reminder to ensure that you replace the bulb at regular intervals or when it burns out.
Always use genuine Whirlpool replacement freezer light bulbs that are compatible with your freezer model. Using non-approved bulbs may result in incorrect lighting and may not fit properly.

By following these steps, you can easily replace the freezer light in your Whirlpool freezer. A properly functioning freezer light is essential for finding items quickly and efficiently, especially in low-light conditions. If you encounter any difficulties or are unsure about any aspect of the process, consult your freezer's user manual or consider seeking assistance from a professional technician for added safety and convenience.
Connect to virtual expert

Our virtual experts can diagnose your issue and resolve simple problems.