Is it Important to Do Regular Maintenance on Refrigerator?
The manufacturer recommends that Sub Zero owners clean their condenser every 3-6 months. This can be done by the homeowner or by a professional appliance repair and maintenance company.
How long does it take to wash a load of laundry?
Though it may not seem like it, laundry doesn't take that long. A wash cycle is about 30 minutes per load, and a dry cycle lasts around an hour.
Is a Tankless Water Heater better than a conventional storage tank?
The answer is yes and no. Tankless water heaters are great, they have very low operating costs, because they use very little energy, can be installed in tight spaces, provide an endless supply of hot water if designed properly. The pros of a conventional storage tank are that they have a low upfront installation cost, require very little or no maintenance, require no electricity to operate on most models. Repairs are less expensive than a tankless when needed. Contact us at (877) 777-0796, and let us help choose the right option for your home or business.
I want to follow up on a repair of some parts.
I'm so sorry, he won't be able to answer the phone. So let me send him a message, and during the day, I will get back to you with the information because it is Sunday, our technician doesn't work today. Anyway, if not even today, we will update you tomorrow morning.
I AM REPLACING THE OUTDOOR UNIT, DOES THE INDOOR UNIT NEED REPLACING?
The outdoor unit, also known as the condenser unit and the indoor unit, also known as the air handler are two separate units. Each unit works independently and does not need to be replaced if the other is. The role of the condenser is to remove heat from the system, while the role of the air handler is to condition and circulate the air.
How do I get my toilet tank to stop over flowing?
Most often the cause is the fill valve in the tank has a leak in it. If the fill valve is old, you should replace it. Sometimes the shaft or wire that is used to set the level corrodes off. If the shaft or wire seems to be your problem then replacing it should fix your problem. Another possibility, if the fill valve has been replaced recently, is that it could be set too high.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible