Ask us anything
reset viking refrigerator VFI7240W
To reset a Viking refrigerator model VFI7240W, follow these steps:
1. Locate the refrigerator's power cord at the back and unplug it from the power source.
2. Wait for at least 1 minute to allow any residual power to discharge.
3. Plug the refrigerator back in and make sure it is properly connected to the power source.
4. The refrigerator should now reset, and the display panel will power on.
5. Set the desired temperature and other settings as needed.
6. Allow some time for the refrigerator to cool down and start functioning normally.
If the issue persists or you encounter any problems, refer to the refrigerator's user manual or contact Viking customer support for specific reset instructions and troubleshooting assistance.
1. Locate the refrigerator's power cord at the back and unplug it from the power source.
2. Wait for at least 1 minute to allow any residual power to discharge.
3. Plug the refrigerator back in and make sure it is properly connected to the power source.
4. The refrigerator should now reset, and the display panel will power on.
5. Set the desired temperature and other settings as needed.
6. Allow some time for the refrigerator to cool down and start functioning normally.
If the issue persists or you encounter any problems, refer to the refrigerator's user manual or contact Viking customer support for specific reset instructions and troubleshooting assistance.
Similar Questions
- Why do i smell bleach when there is none?
- Yes, check out our service troubleshooting section for some help on what you can check to possibly avoid the expense of a service call.
- What does PS mean in cars?
- What maintenance is required for the Coleman HRV Series Heat Recovery Ventilator?
- Is it worth purchasing the Viking 15" Undercounter/Freestanding Nugget Ice Machine FGNI515 at home
- How long will a 6000mah battery last?
- I'm calling back about a stove that I want to get service. They told me it was a general electric. The pilot, the gas and everything works but doesn't seem to be heating up. Can I have something as soon as possible, like tomorrow or the day after?
- Can handles be replaced on thermador
- Why does a plumbing system need a vent?
- How can I check and replace the capacitors in my Goodman air conditioner to prevent breakdowns?
Similar Blog
September 05
9060
Heating and Cooling
The Ultimate Guide to Indoor Air Pollution: Protecting Your Home and Health
In a time when our homes serve as our sanctuaries, the indoor air's quality significantly influences our overall health and wellness. 'The Ultimate Guide to Ind...
June 10
7786
Plumbing
How to Remove Foul Bathroom Odors
Any home can suffer from the unwelcome presence of unpleasant bathroom scents, compromising our comfort and the atmosphere. Finding solutions to eliminate bad b...
March 12
9290
Heating and Cooling
Improving Indoor Air Quality in Your Home
Enhancing indoor air quality within our homes is not merely a matter of comfort but a fundamental aspect of maintaining good health. From dust particles and pet...
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible