Ask us anything

How to change water filter for Whirlpool Gold refrigerator?

Changing the water filter in your Whirlpool Gold refrigerator is an essential maintenance task to ensure clean and fresh-tasting water and ice. Replacing the filter regularly helps remove impurities and contaminants from your water supply. Here's a step-by-step guide on how to change the water filter in your Whirlpool Gold refrigerator:

Safety Precautions:
Before you begin, prioritize safety by washing your hands thoroughly. It's also essential to turn off the water supply to the refrigerator to prevent any accidental water leaks while you're working on the filter replacement.

Tools and Materials:
Gather the necessary tools and materials for the task, including:
* Replacement water filter (ensure it's compatible with your Whirlpool Gold refrigerator)
* Towels or a container (to catch any water that may drip during the replacement)
Step-by-Step Guide:
Locate the Water Filter Compartment:
* The water filter compartment in your Whirlpool Gold refrigerator is typically located in the refrigerator compartment, either on the upper right or upper left side. The exact location can vary depending on the refrigerator model. Refer to your refrigerator's user manual or check the labeling on the filter compartment for its exact location.
Turn Off the Water Supply:
* To ensure no water flows during the replacement, turn off the water supply to the refrigerator. Locate the water shut-off valve, usually located behind or beneath the refrigerator. Turn the valve clockwise to close it completely.
Prepare for Drips:
* When you remove the old water filter, there may be some water trapped in it that could drip out. Place towels or a container underneath the filter compartment to catch any water and prevent it from spilling onto your refrigerator's interior.
Remove the Old Water Filter:
* Open the filter compartment to access the old filter. The filter is usually installed in a housing with a knob or release button that secures it in place. Depending on your refrigerator model, you may need to turn the filter counterclockwise or press a button to release it. Follow the instructions provided in your user manual for your specific refrigerator model.
Dispose of the Old Filter:
* Properly dispose of the old water filter following local regulations. Some areas have recycling programs for water filters, so you may want to check if that's an option for you. To dispose of it, simply pull the old filter out of the compartment.
Prepare the New Water Filter:
* Unpack the new water filter and check it for any packaging or protective seals. If present, remove them. Also, some filters may have an indicator sticker or label with a replacement date. You can fill in the date with a marker if desired.
Install the New Water Filter:
* Slide the new water filter into the filter compartment. Ensure that it's oriented correctly, following any arrows or labels indicating the proper direction. It should fit snugly into place.
Lock or Secure the Filter:
* Depending on your refrigerator model, you may need to lock or secure the new filter in place. Follow the same process in reverse order of how you removed the old filter. If it uses a knob, turn it clockwise until it's tight. If it has a latch or locking mechanism, engage it to secure the filter.
Turn On the Water Supply:
* Reconnect the refrigerator to its water supply by turning the water shut-off valve counterclockwise to open it. This will allow water to flow to the refrigerator.
Test the Water Dispenser:
* Wait for a few minutes and then test the water dispenser on the refrigerator's door. Run water through it for a minute or two to purge any air from the system and ensure the water flows properly.
Reset the Filter Indicator (if applicable):
* Some Whirlpool refrigerators have a filter status indicator that needs to be reset after replacing the filter. Refer to your refrigerator's user manual for specific instructions on how to reset the indicator. Typically, it involves holding down a button or pressing a specific combination of buttons.
Close the Water Filter Compartment:
* Close the water filter compartment securely, ensuring it latches or locks into place.
Monitor the Filter Life:
* Keep an eye on the filter's recommended replacement schedule. Typically, refrigerator water filters should be replaced every six months, but this can vary depending on usage and the type of filter you have.

By following these steps, you can successfully change the water filter in your Whirlpool Gold refrigerator. Properly replacing the water filter is essential for ensuring the quality of your drinking water and ice. Regular filter replacement helps maintain water and ice that are free from impurities and contaminants. If you encounter any difficulties or are unsure about any aspect of the replacement process, consult your refrigerator's user manual or consider seeking assistance from a professional technician to ensure a safe and effective filter replacement.
Connect to virtual expert

Our virtual experts can diagnose your issue and resolve simple problems.