Ask us anything
How to fix a stripped GE Monogram refrigerator door handle?
Fixing a stripped GE Monogram refrigerator door handle involves addressing the stripped screw holes that are causing the handle to become loose. Here's a step-by-step guide to help you address this issue: 1. Remove Handle: Start by carefully removing the loose handle from the refrigerator door. Use a screwdriver to remove any remaining screws. 2. Inspect Screw Holes: Examine the screw holes in both the handle and the door. If the holes are stripped (enlarged or worn), the screws won't hold securely. 3. Fill the Holes: To repair stripped screw holes, you can use several methods. One option is using wooden toothpicks or wooden matchsticks. Dip the toothpicks or matchsticks in wood glue and insert them into the stripped screw holes. Break off any excess toothpick or matchstick, leaving them flush with the surface. 4. Reattach Handle: Align the handle with the screw holes and insert the screws. The toothpicks or matchsticks coated in wood glue will create a stronger grip for the screws. 5. Tighten Screws: Use a screwdriver to carefully tighten the screws. Be cautious not to overtighten, as this could damage the repaired screw holes. 6. Allow Drying Time: Let the wood glue and toothpicks or matchsticks dry thoroughly. This might take a few hours or as recommended by the glue manufacturer. 7. Replace Screws: If the screws are worn or damaged, consider replacing them with new screws of the same size and type. 8. Use Larger Screws: If the screw holes are severely stripped, you can drill slightly larger pilot holes and use slightly larger screws. Be careful not to drill too large a hole, as this could weaken the handle or the door. 9. Professional Help: If the handle's material is damaged or if the issue persists, it's recommended to consult a professional repair technician or a woodworking expert. They can provide guidance on more advanced repairs or replacements. 10. Regular Maintenance: To prevent future handle issues, periodically check and tighten the screws as part of routine maintenance. Remember to exercise caution when working with tools and glue. If you're unsure about any step or lack experience, seeking professional help can ensure a proper repair that maintains the integrity of the handle and the refrigerator door.
Similar Questions
- Should I have the York YC2D 13.4 SEER2 Single Stage Air Conditioner's refrigerant levels checked periodically?
- How to troubleshoot and repair issues with the Coleman S Series 23 SEER2 Multi-Zone Mini Split Heat Pump System?
- What size wire do I need for 220 outlet?
- What type of tape will stick to brick?
- What s the point of preheating an oven?
- Kenmore front-load washer, how to reset the computer?
- How do I reset the filter change notification on my Wolf DF606CG Dual Fuel Range?
- How do I clean the coils on my Bryant evaporator unit?
- Do you provide 24 hour service?
- How many filters does an Amana air handler have?
Similar Blog
July 01
888
Plumbing
Say Goodbye to Smelly Kitchen Drains
Tired of that foul odor wafting from your sink every time you enter the kitchen? Smelly drains in kitchen spaces are more than just unpleasant - they can ruin y...
October 20
2929
Home appliances
What Would Cause A Microwave To Stop Working?
Is your microwave broken, or does it look like your microwave is nearing its end? Are you wondering how long it should last? Then check out this article for ans...
January 06
907
Home appliances
Comparing gas and electric stoves
Depending on what and how you cook, both gas and electric ranges have benefits. While the dry, consistent heat of electric range ovens may be superior for some ...
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible