Ask us anything
How to replace control board 8186393 on KitchenAid range?
Replacing the control board (part number 8186393) on a KitchenAid range involves several steps, and it is essential to follow them carefully to ensure safety and proper functionality. Please note that working with electrical components can be hazardous, and if you're not comfortable or experienced with such tasks, it's recommended to seek professional assistance. Safety Precautions: Before starting, unplug the range from the power outlet to avoid electrical shock. Ensure the range has had time to cool down before proceeding. Accessing the Control Board: Open the oven door and locate the screws holding the top panel or control console in place. Depending on your range model, you may need to remove the burners and burner grates to access these screws. Once you've removed the screws, gently lift or slide the control console forward to access the control board. Disconnecting Wires: Take a photo or make a diagram of the wire connections on the old control board to aid in reassembly. Carefully disconnect all wires connected to the control board. Some may have plastic connectors that can be gently pried off, while others may require a screwdriver to loosen terminals. Removing the Old Control Board: Once all wires are disconnected, remove any screws or brackets securing the control board in place. Carefully lift the old control board out of its position. Installing the New Control Board: Place the new control board into position and secure it with screws and brackets as needed. Reconnecting Wires: Refer to the photo or diagram you made earlier and reconnect all wires to the appropriate terminals on the new control board. Reassembling the Range: Slide or lower the control console back into place and secure it with the screws you removed earlier. Testing: Plug the range back into the power outlet. Turn on the range and test the functions to ensure the new control board is working correctly. Final Check: Once the range is operational, double-check all connections and ensure everything is securely in place. Remember to exercise caution throughout the process, and if you encounter any difficulties or uncertainties, consult the KitchenAid user manual or seek professional assistance.
Similar Questions
- My air conditioner does not seem to be cooling, so I turned the thermostat down. Shouldn’t it work better if it is set to a lower temperature?
- How many filters does a Kenmore Coldspot model #106.51133 213 have?
- I have a Maytag Bravo side-by-side dryer that doesn't seem to be drying completely. It's about a year and a half, so I think it's still under warranty.
- How can I ensure proper drainage and prevent clogs in the Adora Series dishwasher model DDT700SSFSS?
- What size wire do I need to run a 220v welder?
- How Much It Will Cost To Repair My Appliance?
- Where should I place the Rheem EcoNet Enabled Classic Plus Series Two-Stage Air Conditioner (RA17) for even cooling?
- I live in Middle Village, and I think I have an issue with my boiler.
- How to fix a leaking refrigerator?
- This is what happened before I told them to be there at 8am; I have to be the first guy in the morning. They came at almost 10am and no one's home. This morning someone was supposed to come at 8, and no one showed up.
Similar Blog
October 20
2944
Home
5 Ways To Get Better - Tasting Ice Cubes From Your Ice Maker
Ever thought to yourself, "why does my ice taste bad?" Like most homeowners, you probably use your ice maker to produce those small, hard, and often tasteless i...
January 30
11000
Electrical
6 Causes An Electrical Outlet To Melt
Electrical outlets are essential components of our homes, powering our electronic devices and appliances. However, there are instances when these seemingly inno...
October 03
9918
Home appliances
How to Save Money by Using Your Washer Efficiently
In a world where household expenses seem to be constantly on the rise, it's essential to find ways to cut costs without compromising on daily comforts. One ofte...
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible