Ask us anything

how to replace water filter for sub zero 685

To replace the water filter for a Sub-Zero 685 refrigerator, follow these steps:
1. Locate the water filter: The water filter is typically located inside the refrigerator compartment, either at the top or bottom.
2. Turn off the water supply: Locate the water supply valve behind the refrigerator and turn it off to prevent water leakage during the replacement process.
3. Remove the old filter: Twist or push the old filter counterclockwise, depending on the type, and gently pull it out.
4. Prepare the new filter: Remove any packaging and protective caps from the new filter.
5. Install the new filter: Insert the new filter into the filter housing and twist or push it clockwise to secure it in place.
6. Turn on the water supply: Turn on the water supply valve, and run water through the dispenser for a few minutes to flush out any air or debris.
Always consult your refrigerator's manual for specific instructions and the correct replacement filter model.
Connect to virtual expert

Our virtual experts can diagnose your issue and resolve simple problems.