When I turn on my faucet, it makes a chattering sound. Why?
The washer in your faucet is loose and needs to be replaced. We have residential service trucks that are equipped with thousands of specialty parts specific to your needs. Efficiency from us = cost savings for you!
Similar Questions
I have somebody who came out yesterday for my dishwasher, and we are scheduled to come back with the part on Saturday. Can you find me my record, please? You know, I changed my mind, and I'm going to buy a new dishwasher. So can you cancel the repair and then I'll pay for the service?
Yes, then, in this case, we will proceed with the payment. I will forward this information to the technician, and we will charge you for your call.
When’s the time for an electrical outlet repair or replacement?
You should consider an outlet repair or replacement once you start observing buzzing sounds or sparks, as well as visible traces of burn marks on the wall.
Whats bigger 8mm or 10mm?
Ten millimeters is more than eight millimeters.
How to replace a burned electrical wiring
When replacing burned electrical wiring, it is essential to take safety precautions and use the right tools and materials. To start: Turn off the power source (breaker box) and remove any insulation or protective covering that may conceal the wiring. Inspect the wiring to determine which wiring needs to be replaced. If possible, mark the old wires with colored tape so they can easily be identified later. Once you have determined which wire needs to be replaced, use wire strippers or a utility knife to strip back 1/2 inch of insulation from each end of the wire. Connect a new piece of insulated electrical wire from one end of the old wire cut out to one side of the circuit breaker for a power source connection. Make sure the two pieces are connected firmly using crimp connectors or pliers. At this point, you should join one end of another new insulated electrical wire from the other side of the breakers for a power source connection at one end. Then proceed by attaching it securely to either side of a switch(s) within your desired circuit. For optimal safety when working with electricity, always wear rubber-soled shoes when handling wires and attempt not to work alone if possible in case of an emergency while working on live wires. Keep metal objects away from exposed wires as they can conduct electricity and prevent electrocution or electric shock if there is contact with live current. Additionally, all exposed wires must be covered with an approved electrical conduit before turning on the power again, just in case there are potential hazards, such as short circuits needing protection.
Where is the reset button on an indesit washing machine?
You can find the reset button on an Indesit washing machine on the control panel. It is typically labeled as "Reset" or has a symbol of an arrow circling a square. To reset your washer, start unplugging it from the outlet for a couple of minutes. Once that's done, press and hold the start button for three seconds. And this should give you control over the washing machine again so that you can put it into a drain/spin cycle.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible