Ask us anything
on installation of new viking 30" stove reset safety plunger
During the installation of a new Viking 30" stove, you may need to reset the safety plunger. The safety plunger is a feature that ensures the gas supply is cut off if the flame accidentally extinguishes. To reset it, follow these steps:
1. Turn off the gas supply to the stove.
2. Wait for at least 5 minutes to allow any gas fumes to dissipate.
3. Carefully locate the safety plunger, usually near the burner assembly.
4. Gently press and hold the safety plunger for a few seconds.
5. Release the safety plunger and turn on the gas supply.
6. Light the stove burner and ensure the flame stays lit.
If the flame goes out or the stove does not operate correctly, contact Viking customer support or a qualified technician for assistance.
1. Turn off the gas supply to the stove.
2. Wait for at least 5 minutes to allow any gas fumes to dissipate.
3. Carefully locate the safety plunger, usually near the burner assembly.
4. Gently press and hold the safety plunger for a few seconds.
5. Release the safety plunger and turn on the gas supply.
6. Light the stove burner and ensure the flame stays lit.
If the flame goes out or the stove does not operate correctly, contact Viking customer support or a qualified technician for assistance.
Similar Questions
- This is Anna calling back. Sorry about getting disconnected after that long hold. Upon checking our schedule, we can give you a free estimate and send out a plumber for today between 4 to 6. Would that be okay for you? Our plumber will assess the problem and give you a solution and a reasonable quote for the service. If you don't proceed with the repairs, you don't have to pay anything since it's a free estimate. Our plumbers usually carry common plumbing fixtures, and if we don't have the part, we can order it and continue the service next time.
- What heating element do I need for a Whirlpool EE3J50RD045V hot water heater?
- How to fix a Frigidaire front load washer pauses itself before spin cycle?
- What should be done to keep the Allegiance 16 Central Air Conditioner running smoothly?
- Kenmore filter reset light AC, no filter reset button.
- I have two copper tubings that were hot and now it's cool on my Amana fridge, what does that mean?
- Is air duct cleaning necessary?
- What should be the care routine for the Lennox ML196E Gas Furnace to ensure its long-term efficiency?
- So I have a doctor's appointment until 12 PM. Do you think I can switch appointments? Can you do it between 12 and 4 PM?
- Does thermador cooktop have an on switch
Similar Blog
August 04
10028
Electrical
When Is The Right Time To Contact a 24/7 Emergency Electrician?
Welcome to our blog, where we shed light on one of the most critical aspects of electrical safety - knowing when to contact a 24/7 emergency electrician. Electr...
January 22
9325
Home appliances
Is Your Refrigerator Compressor Running Too Hot? Here's What You Need to Know!
In the heart of your kitchen, your refrigerator hums along, faithfully preserving your food. Yet, beneath the chilled shelves and crisp drawers lies a critical ...
October 17
9018
Heating and Cooling
15 Reasons Why You Need a Fall HVAC Tune-up
As the crisp autumn breeze starts to sweep through Los Angeles, it's time to think about your home's comfort and efficiency. Your HVAC system, your trusty compa...
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible