About a time change with what I have set today. They were asking me to call back and confirm.
So your original appointment here is between 2pm and 5pm, and it is rescheduled between 5pm and 6pm today. The technician will give you a call 30 minutes before he arrives.
Similar Questions
How many amps does a 50 gallon water heater draw?
Most 50-gallon electric water heaters use 4500 watts. With a 240-volt electric circuit, this is equal to 18.75 amps. In other words, a 50-gallon water heater won't flip a 20 amp circuit breaker, but it will make the breaker work at nearly full capacity (95%) -something most breakers aren't designed to handle well.
How many horsepower is 250cc?
While there's no guaranteed connection between horsepower and a 250cc engine—since horsepower measurement also considers other elements—a rough estimate would be 15 to 16 horsepower in a 250cc engine.
Why does my front-load washing machine smell like mold?
Most scents may be eliminated with a washing machine cleaner, which you can purchase. If the issue still exists, we may unscrew the pump and hose and thoroughly clean it; this might be helpful.
The temperature of my hot water seems to be higher than what I think it needs to be.
The new standard temperature that manufacturers use when presetting your water heater at the factory is typically 120 degrees Fahrenheit. This is a sufficient temperature for most households. If you have an older model, you can set the thermostat at medium. Gas models usually have a dial on the front of the gas valve. Electric models have thermostats — there may be two — that are concealed behind the two panels on the side of the tank. You can adjust the temperature to meet your needs. Keep in mind that hot water also helps in minimizing the growth of bacteria.NOTE: Turn off the electricity to the water heater before performing any personal maintenance. There can be exposed wires behind the panels that may result in extreme shock.
I just wanted to know what time the electrician will arrive since we have a session today, so the electrician will only get to see the breaker and not the room with the issue.
I can't really reach the technician right now. Give me a minute, and I'll tell him to call you and inform you of his ETA.
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible