Ask us anything
How do I do a factory reset on a Frigidaire Affinity washer?
Performing a factory reset on a Frigidaire Affinity washer can help resolve certain issues and restore the washer to its default settings. Here's how you can do it:
1. Ensure the washer is powered on and idle.
2. Press and hold the "Cancel" button and the "Start" button simultaneously for approximately 3 seconds.
3. Release the buttons once the display shows a series of lights or an error code.
4. Wait for a few seconds while the washer resets to its factory settings. The display may go blank during this process.
5. After the reset is complete, the washer should be ready for use. You can set your desired wash cycle and start a new load.
1. Ensure the washer is powered on and idle.
2. Press and hold the "Cancel" button and the "Start" button simultaneously for approximately 3 seconds.
3. Release the buttons once the display shows a series of lights or an error code.
4. Wait for a few seconds while the washer resets to its factory settings. The display may go blank during this process.
5. After the reset is complete, the washer should be ready for use. You can set your desired wash cycle and start a new load.
Similar Questions
- Why is my oven glowing, but not heating?
- How to replace user filters in a Bryant Preferred series air purifier?
- What should be the recommended thermostat settings for optimal energy efficiency when using Carrier Commercial HVAC's Infinity® System for heating and cooling in my building?
- Is it worth the cost to upgrade to a high-efficiency Goodman ComfortNet thermostat for advanced features and remote control?
- How much should an Amana gas furnace and air conditioner replacement cost?
- We live in Echo Park, and I have a dishwasher with a fan or blade that isn't spinning. It's a Kenmore dishwasher.
- I just want to know if the piece I ordered is already there because they told me Monday; that they were going to get the piece. Can you check for me, please? Can somebody check the system if the piece is going to be there? Because they told me it is going to be here on Saturday maximum of Monday.
- What do you do when the reset button on a Miele vacuum lights up?
- Is it okay to increase the temperature settings on a TK-340X3-PIH Takagi water heater, and what precautions should I take if I choose to do so?
- Can I perform basic maintenance on the York YC2F 15.2 SEER2 Air Conditioner, such as cleaning the condenser coils, myself?
Similar Blog
April 12
1529
Air Duct Cleaning
What Is The Dirtiest And Most Unsanitary Part Of Any Building
As we go about our daily lives, we are all exposed to a variety of health risks. Driving a car, flying in a plane, participating in recreational activities, and...
January 26
9147
Plumbing
DIY vs. Professional Water Heater Installation: Weighing Your Options
When it comes to replacing your water heater, you have a crucial decision to make: should you embark on a DIY installation project or enlist the services of a p...
August 23
4234
Home appliances
5 Home Repairs You Really Should Know How To Do Yourself
If you own a place or rent an apartment, you know you will need some of the most common home repairs sooner or later. You will want something fixed or added to ...
Couldn't find the right question?
You can send your question to our support team. We'll get back to you as soon as possible