Ask us anything

how reset maytag mhwe 3000vw10

The Maytag MHWE3000VW10 is a front-loading washing machine, and it may require a reset for various reasons, such as to clear error codes or resolve operational issues. Here are some steps you can follow to reset your Maytag MHWE3000VW10 washing machine:

1. Power Off the Washer:
Start by ensuring that the washing machine is powered off. If it's currently running a cycle, wait for it to complete or manually cancel the cycle.
2. Unplug the Washer (Optional):
For a complete power reset, you can unplug the washer from the electrical outlet. Leave it unplugged for a few minutes to ensure all residual power is discharged.
3. Plug the Washer Back In:
Plug the washing machine back into the electrical outlet. Make sure it is securely connected.
4. Turn the Washer On:
Press the "Power" button to turn on the washer. The control panel should light up and display the default settings or any error codes that may be present.
5. Reset the Washer:
If you want to reset the washer's settings to the factory default, press and hold the "Cycle Signal" button for approximately 3 seconds. This action should clear any custom settings or cycle options you may have selected.
If you're dealing with a specific issue or error code, you may need to perform a different type of reset. Refer to the following instructions based on your situation:
Reset for Error Codes:
If your washing machine displays an error code, consult your Maytag MHWE3000VW10 owner's manual or use the following general steps to clear error codes:
a. Press the "Power" button to turn off the washer.
b. Unplug the washer from the electrical outlet for a few minutes.
c. Plug the washer back in and turn it on.
d. Observe the control panel for any error codes. If an error code is displayed, note it down.
e. Refer to the manual or online resources to identify the meaning of the error code and troubleshoot the issue accordingly.
f. Once the issue is resolved, press the "Power" button to turn off the washer and then turn it back on.
Reset for Control Lock Feature:
If the control panel is locked and unresponsive, it might be in "Control Lock" mode. To unlock it:
a. Press and hold the "Control Lock" button (or a similar button labeled "Hold to Lock" or "Lock Control") for approximately 3 seconds until the control panel unlocks.
Reset for a Stalled Cycle:
If the washer is stuck in the middle of a cycle and won't proceed, you can try the following steps to reset it:
a. Press the "Cancel" button to stop the current cycle.
b. Wait a few moments for the washer to drain and unlock the door, if necessary.
c. Select a new cycle and press the "Start" button to begin a new load.
Reset for Other Issues:
If you're experiencing other operational issues, such as unusual noises or malfunctioning cycles, consult your owner's manual for specific troubleshooting steps. In some cases, you may need to perform a factory reset or contact Maytag customer support for assistance.

Remember that the specific reset procedure may vary depending on the nature of the issue you're encountering and the model of your Maytag washing machine. Always refer to your owner's manual for model-specific instructions and troubleshooting guidance. Additionally, if the problem persists despite your reset attempts or if you are unsure about any steps, consider reaching out to a Maytag service technician for professional assistance.
Connect to virtual expert

Our virtual experts can diagnose your issue and resolve simple problems.